Page 2 of 4
Assembly Instructions
Prepare Arms for Assembly.
2A
Fit Wooden Dowels.
Rear
stretcher
( no
plates
)
2B
Attach Arms to Stretchers.
Your arm style may vary.
The
Front
Stretcher
has
metal
plates
which
should
face
upwards.
Using Bolts and Barrel Nuts provided with the Arms,
attach the Arms LOOSELY to the Stretchers as shown..
It is important that these bolts are left loose!
Fasten Stretcher Brackets to Arm.
NOTE:
The hardware for these steps is included with the Arms.
Some Arms may not have these features, so just skip these steps.
See below for Assembly
of the Lounger Frame.
LOUNGER BIFOLD FRAME
N&D-0209
Cleat
A.
C.
Insert the Stretcher
Bracket Cleat into
the hole provided.
Each arm requires
two brackets, front
and back.
B.
IMPORTANT: Don't
fully tighten Bracket
until Stretchers are
all in place for easy
alignment.
Stretcher
Bracket
Hole for cleat
Leg
Dowel Hole
Stretcher
Bracket
16mm Bolt
Allen Key
Hole for bolt
Wooden Dowel
Stretcher
Tap dowels all the way into the middle
hole, at each end of the Stretchers
Middle
hole
Wooden Dowel
(See above)
Barrel Nuts
Allen Key -
Leave bolts LOOSE!
Bolts
Bolts
Bolts
THIS END
FRONT
Do not tighten
the Bolts at
this stage!
Be sure the holes are
free of wood chips
and saw dust.
Do not force the Bolt
as you may strip the
thread. Be sure the
thread is properly started.
Barrel Nut
Bolt
Allen Key
Screwdriver
BOLT AND BARREL NUT
ASSEMBLY SYSTEM
Insert Barrel Nuts as shown
using a screwdriver. This will
help you position the Nut in
line with the Bolt.
Bolt
