EXPLORER
EXPLORER
Owner
’
s Manual
Explorer
ANCHOR Audio, Inc. (310) 784-2300
100-0046-000 / Revision B, 06/97
Troubleshooting Guide
Having trouble with the sound system?
Condition
Possible Solution
(italic text below denotes battery models only)
No sound
(power LED not lit)
:
• turn POWER switch ON
• charge battery
Charge indicator doesn’t light:
• check / replace fuse
No sound
(power LED lights)
:
• check for output from source
• make sure all cables are completely plugged in
• turn up volume control of input used
• remove plug from speaker output if not using
external speaker output (AC model only)
Shortened battery life:
• charge battery fully; if battery life continues to
deteriorate, contact Anchor customer service
• reduce volume to eliminate distortion
Distorted sound:
• lower system volume control
• reduce source output level
Excessive hum or noise:
• use shielded cables
• use balanced microphone
Having trouble with the wireless system?
(Wireless models only.)
Condition
Possible Solution
No sound
(TX ON indicator lights):
• set MUTE switch to ON (handheld mic only)
• turn up WIRELESS volume control
• make sure mic is plugged into bodypack
transmitter
No sound (TX ON indicator off): • turn Explorer POWER switch ON
• make sure transmitter power switch is ON
• set receiver and transmitter to same channel
• replace battery in transmitter