MADE IN USA
SIX YEAR WARRANTY
Bigfoot® Sound System Owners Manual
For System Setup & Operation Videos Visit Our Website: www.anchoraudio.com
2
BACK PANEL OF BIG-8000CU4
WIRELESS RECEIVERS
(see page 5)
POWER SWITCH
UNIVERSAL MIC – INPUT JACKS
Balanced XLR – low impedance, for balanced mic,
powers condenser-type mics.
Unbalanced 1/4” – high impedance, for unbalanced
mics, no phantom power.
AC POWER CORD INLET
LINE OUT – OUTPUT JACK
Balanced 1/4”
Record your presentation or connnect
to another powered sound system
(Daisey-Chaining together
multiple Bigfoot Speakers).
BATTERY LEVEL INDICATOR
CHARGE STATUS INDICATOR
BLUETOOTH RECEIVER
(see page 7)
Power On LED
Green - power on
LINE IN – INPUT JACKS
1/4” and 1/8” (3.5mm) is used to hook
up a portable CD player, iPod, Laptop
or other external audio source.
USB DC OUT
-
5V 500 mA
To charge/power external device.
TONE CONTROLS – BASS/TREBLE
CD/MP3 COMBO PLAYER
(see page 4)
BASIC SYSTEM OPERATION
NOTE: Fully Charge Batteries Before First Use!
IMPORTANT: Make all connections with shielded cables to avoid
hum, buzzing or interference.
1. Unfold Line Array
2. Set all Input Levels to minimum & Tone Controls to
flat
(middle) setting
3. Plug wired microphone into the MIC 1 or MIC 2 jacks
and/or any audio source into the LINE-IN jacks
4. Switch POWER to ON, Power ON LED will light
5. Slowly increase Level Controls for active Input Jacks
to desired volume
6. Adjust Tone Controls for desired sound quality
OPENING BIGFOOT LINE ARRAY
1. Unhook rubber latch on bottom
2. Carefully move upward to open position
3. Attach both rubber latches
CLOSING BIGFOOT LINE ARRAY
1. Turn POWER to OFF
2. Unlock both rubber latches
3. Fold Array to closed position
5. Close Array latch
IMPORTANT: Latches MUST be locked and grill MUST
face forward for system to work!