2. Turn on the faucet and pull out the
stick of the diverter valve as shown
in the image. The diverter valve will
divert water to the filter unit and
water will come out of the spout in
the filter.
3.
Allow it to run for several minutes to flush out the carbon fines
(blackish specs). Initially, the water may contain tiny air bubbles
and taste slightly sweet - this is normal and harmless, and will
clear up after flushing.
4.
To stop the flow from the filter and for normal unfiltered water
flow through your kitchen faucet, push the diverter valve knob
back in.
1. The
electronic
filter
monitor
automatically
shows
remaining
filter capacity on the LCD when
filter is used. LCD automatically
turns off in 3 seconds to save
battery power when not in use.
2.
The electronic filter LCD monitor
blinks 0 and generates an audible
sound to notify that the filter has
reached end of life. The filter
cartridge should be changed at
this point.
LCD Display
