9
STEP 4
a.
Attach Computer Bracket (20) on the Handlebar (15) fasten with Self-Tapping Screw (22) by the
provided Multi-function Wrench ( Screwdriver ) (24).
b.
Insert the Computer Bracket (20) into the flute on the back of the Computer (21). Then remember to
load the 2AA batteries, and insert the sensor wire from the main frame (21-1) into “SENSOR INPUT”
hole (21-1) on the back of the computer.
Most Important
After all above 4 steps finished, the most important thing is to make sure all the bolts and parts
are securely fixed before you are riding on the bike.
