ANCHEER
10
Installation And Adjustment
Open the package of the bike, take out the electric bike and all the parts inside and use the
tool to cut off the packing rope.
1. Install the Stem and Handlebar
2. Install the Saddle
1.1
2.1
1.2
Turn the stem to the front while ensuring that the U-shaped bridge of the fork is
forward. Using the wrench from tool kit to loosen the four screws.
Install the reflector and fender on the saddle tube.
Put the stem into the bike in balance and you can adjust the handlebar in a
property angel and position.If you find the handlebars are not in the right
direction, loosen the top bolt, adjust the angle of the handlebar to keep it in
horizontal direction, then tighten the top bolt.
Facing
Forward
