Copyright © 2015 Shenzhen ANB Technology Co., Ltd. All rights reserved.
Red
Power +(12-36V DC)
Yellow
Cut-off, Digital output
White
Ignition Detection(ACC)
Brown
Door status high input
Blue
Panic(SOS) low input
5. Device configuration
TS10 allow user to use SMS Commands to configure necessary parameters.
Details please check as follows instruction:
5.1 Configure GPRS Parameter
SMS Command:
*1234*GPRS:211.154.142.150,9119,T,apnName,apnUser,apnPass#
Tis data transmit mode. T=1 is using UDP mode. T=0, is using TCP mode. Default as 0.
-Device ID
TS10 doesn’t need configure device ID. The device is default using device SN code as ID.
On the unit case side is with a barcode sticker. please use this code as device ID when
you register device tracking platform.
5.2 ConfigureAuthorized Phone Numbers for alarm alerts
SMS command:
*1234*A8613554806820*B13554806821*C13554806822#
5.3 Change SMS Password
TS10 only will accept SMS command with correct password and correct command format.
The factory default password is 1234.
SMS command:
*1234*E4321#
<<1234 is the original password. 4321 is the new password>>
