Copyright © 2021 Shenzhen ANB Technology Co., Ltd. All rights reserved.
10
SMS query Command:
(speed,0)
6.14 Setup motion sensitivity threshold
Note:
It is not recommended to modify this parameter.
SMS setting command:
(gsensor,1,sensitivity,moving time,static time)
sensitivity: value from 1 to 1000, the larger the value, the less sensitive, default is 100.
moving time: if the movement is greater than the threshold and lasts longer than this time,the
device will be considered to be in motion, unit is second, default value is 1.
static time: if the movement is smaller than the threshold and lasts longer than this time,the device
will be considered to be in static, unit is second, default value is 180.
Example:
(gsensor,1,100,1,180)
SMS query command:
(gsensor,0)
6.15 Setup ACC association
Note:
It is not recommended to modify this parameter.
SMS setting command:
(acc,1,input/sensor,lock position)
input/sensor: 1 is ACC by wire harness input. 0 is ACC by G sensor moving status, default is 1.
lock position: 1 is when ACC off location will not change, 0 is when ACC off location will change,
default is 1.
Example:
(acc,1,1,1)
SMS query command:
(acc,0)
6.16 OTA Operation
GT08L allow user to do firmware upgrading via GPRS connection. Details operation
command and procedure, please consult with your seller.
