3
1.
Introduction
AS201E is a GSM/GPRS/GPS alarm tracking box for multi applications.
This small unit is equipped with Quad Bands GSM/GPRS module, Hi-sensitivity GPS receiver and 3D
Accelerometer. It’s also can be connected with optional wireless/wired accessories like fuel senor, RFID reader,
iButton Probe Kit, Temperature senor, RF Key Fob, Alarm siren and Relay for external electronics device control.
It supports both GPS tracking and backup LAC/CID tracking, which brings an idea solution with no blind tracking
both indoor and outdoor.
1.1 Instruction of Safety
Do not disassemble the device more than it is allowed. If the device is damaged, the power supply cables are
not isolated or the isolation is damaged, before unplugging the power supply, do not touch the device.
All wireless data transferring devices produce interference that may affA ect other devices which are placed
nearby.
The device may be fitted only by qualified personnel.
The device must be firmly fastened in the predefined location.
The device is susceptible to water and humidity in environment with IP class greater than IP67.
Any installation and/or handling during a lightning storm is prohibited.
Ensure that the batteries are not immersed in water. When stored, keep the device in a cool and dry place.
Ensure that device and batteries are not exposed to hot surfaces or direct sunlight.
1.2 Specification
-
Physical Specification:
Dimension: 92x64x24mm
Weight: 140g
Enclosure: Aluminum Metal Box
Connector:
Molex 18Pin Connector,6Pin Molex Connector and one 4Pin Molex Connector
SMA Connector for GSM/GPS antenna
Mini USB port for configuration and firmware update
-
Power Supply:
Voltage: 9-36V DC
Power Consumption:
0-150mA(All active)
7
Simple Sleep:<20mA (GSM ON, GPS Off, Alarm trigger active)
Deep Sleep: <5mA (GSM Off, GPS Off, Alarm trigger active)
Internal Battery:800mAH, 3.7V
-
GPS Navigation:
Antenna: External
Receiver: uBlox NEO 6M engine
Copyright © 2006-2015 Shenzhen ANB Technology Co., Ltd. All rights reserved.
