4
User manual – Pengy Pro Seat
4
www.anatomicsitt.com | +46 11 16 18 00
Mounting the headrest
Mount the main support bracket with lever handle (B) and its washer and screw
(A)� Note that the screw (A) should not be to tightened, it shoulde be possible to
move up and down when the lever knob (B) is loosened�
Height adjusting the headrest
To adjust the height of the headrest, loosen the lever handle (B) and move the
headrest to desired position� Then tighten lever handle (B)�
Angle adjusting the headrest
When adjusting the 3-joint headrest, loosen the screw (C) in the joint you
wish to adjust� Once you reach the desired position, tighten the screw (C) again�
Adjusting the headrest plate sideways
Loosen the screws (D)� Adjust the headrest plate to desired position and tighten
the screws (D) again�
Headrest
Lever handle (B)
Screw (A)
E
(C)
(D)
