User manual Zitzi Flipper Pro
6
www.anatomicsitt.com | +46 11 16 18 00
1
2
Charging the battery
Connect the cable of the charger into a regular wall socket (220 V).
Then connect the cable of the charger into the side of the hand control.
You have to charge the battery for at least 24 hours the first time you use it.
It is very important that you never let the battery uncharge completely. If so, it may
be damage.
Charge the battery for 24 hours the first time.
Thereafter, charge it every night.
Never let the battery uncharge completely.
Connecting the electronic box
When connecting the electronic box the actuator for the lift should be connected to
the box input marked 1.
At the option of electronic tilt function, the electronic box and the electronic
controller have to be replaced for this intended. The actuator for the tiltfunction then
should be connected to the box input marked 2.
The connection for charger is
the side of the hand control.
ACTUATOR (LIFT)
HAND CONTROL
ACTUATOR (TILT)
opyion
