A8520E24A91 – User’s Manual
Page 11 of 34
Release Date 02/27/12
2. Approvals and Usage
The A8520E24A91 has been designed to meet FCC (US), IC (Canada) and ETSI (Europe)
regulations. In particular the radio modules have been certified to the following.
2.1.
Product Approvals
2.1.1. USA (Federal Communications Commission, FCC)
The A8520E24A91 with integrated antenna has been tested to comply with FCC CFR47 Part 15
sub-part C “Intentional Radiators. The devices meet the requirements for modular transmitter
approval as detailed in FCC public notice DA 00-1407 Released: June 26, 2000. The
A8520E24A91 module eliminates the need to re-perform ‘intentional radiator’ testing when
submitting an end product for certification.
(15.19a3) The module complies with part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
2.1.1.1. FCC Labeling Requirements
The A8520E24A91 modules have been labeled with their own FCC ID number and if the FCC
ID is not visible when the module is installed inside another device, then the outside of the
finished product into which the module is installed must also display a label referring to the
enclosed module. This exterior label can use wording such as the following:
Contains Transmitter Module FCC ID: X7J-A10051702
-or-
Contains FCC ID: X7J-A10051702
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
