Anaren AIR Module, Users Manual
1 0 /1 8 , 8/ 1 8/ 20 1 0: 3 :5 7 P M
2.2.
Canada (Industry Canada, IC)
The A1101R09A and A1101R09C modules has been certified for use in Canada under Industry Canada
(IC) Radio Standards Specification (RSS) RSS-210 and RSS-Gen.
From section 7.1.1 RSS-Gen, Issue 2, June 2007, Modular Transmitter Approval:
Host devices which contain separately certified modules do not need to be recertified, provided that they
meet the following conditions:
a) The host device, as a stand-alone unit without any separately certified modules, complies with all
applicable Radio Standards Specifications.
b) The host device and all the separately certified modules it contains jointly meet the RF exposure
compliance requirements of RSS-102, if applicable.
c) The host device complies with the certification labeling requirements of each of the modules it
contains.
Note: Compliance of a module in its final configuration is the responsibility of the applicant. A host
device will not be considered certified if the instructions regarding antenna configuration provided in the
original description, of one or more separately certified modules it contains, were not followed.
From section 5.2, RSS-Gen, Issue 2, June 2007, Equipment Labels: All Category I radio equipment
intended for use in Canada shall permanently display on each transmitter, receiver, or inseparable
combination thereof, the applicant's name (i.e., manufacturer's name, trade name or brand name), model
number and certification number. This information shall be affixed in such a manner as not to be
removable except by destruction or defacement. The size of the lettering shall be legible without the aid
of magnification, but is not required to be larger than 8-point font size. If the device is too small to meet
this condition, the information can be included in the user manual upon agreement with Industry
Canada.
Label:
Contains IC: 8975A-A10040601
From section 7.1.6, RSS-Gen, Issue 2, June 2007, Digital Circuits: If the device contains digital circuitry
that is not directly associated with the radio transmitter, the device shall also have to comply with ICES-
003, Class A or B as appropriate, except for ICES-003 labeling requirements. The test data obtained (for
the ICES-003 tests) shall be kept by the manufacturer or importer whose name appears on the equipment
label, and made available to Industry Canada on request, for as long as the model is being marketed in
Canada.
For more information see: Industry Canada
http://www.ic.gc.ca/
