Analytik Jena CyBio Well vario OL3381-25-300, Руководство по эксплуатации

Страница: 99 / 164

CyBio
®
Well vario Release: 2017 83
Operation
Capillary head
Pipettor settings can be adapted to specific user or application requirements. This can
be achieved via the [Configuration] menu:
1. Restores the main menu should the pipettor be working in a different submenu.
2. Use key or in the main menu to select the [Configuration] submenu.
3. Confirm your selection with the key.

You are working in the [Configuration] menu now.
.
Fig. 82: Display – configuration menu (capillary head)
4. Select appropriate parameter and enter desired values in [Configuration] menu,
(refer to description below). Confirm each input by pressing .
Working in the [Configuration] menu you can set the following parameters:
Table motion path
For defining a maximum available length of table motion (lifter height). This setting pre-
vents mechanical collision of a vessel with tips. It also facilitates different applications,
for example, the picking up of liquid over a cell lawn or the pipetting onto the bottom
of a microplate from a preselected distance. The height position can be adjusted in
steps of 0.1 mm.
dZ
For updating the vertical setting value for the lifter following necessary replacement of
the lifter (setting value inscribed on lifter bottom on shipment). This will automatically
correct vertical lifter adjustment so previously edited programs need not be changed in
terms of height coordinates.
CAUTION
There is danger of tips suffering damage or getting destroyed!
A value setting for lifter height will only be effective in manual mode so it may be ex-
ceeded in software-controlled operation mode!
Stage height dZ Wells XY
Stage speed Beep Exit