Dr Strangelove User Manual 11-2017
Safety Instructions
PLEASE READ CAREFULLY BEFORE USING:
•
Only use the correct power adaptor.
•
Never handle the adaptor with wet hands.
•
Never excessively bend the adaptor cable or get it trapped or place heavy objects on it. If
the adaptor cable becomes damaged, replace the adaptor.
•
Ensure the unit is disconnected from the mains before moving or cleaning.
•
Always disconnect the unit from the mains if there is lightning in your area.
•
Ensure the unit is on a stable surface, and never place heavy objects on top of it.
•
Never allow young children, hippies or animals to operate the unit or adaptor.
•
Do not use excessive force when using the controls or inserting cables to the
connectors.
•
The unit should not be operated in the rain, near water, or at a foam party, and should not
be exposed to moisture.
•
If the unit is brought from a cold environment to a warm one, the unit should be
left to reach the ambient temperature.
•
Keep away from heat sources, such as radiators, ovens, heaters etc.
•
Never allow it to get wet. Do not operate it near water, like pools, sinks,
bathrooms etc. Oh, we covered that already.
•
Do not place beverages on or near it.
•
Never open the case or attempt to make repairs. Refer any servicing to qualified
service personnel.
PREVENTING DAMAGE TO OTHER CONNECTED DEVICES
synthBlock has a very high dynamic range. It is capable of produce loud signals of very high and
sub-sonic frequencies that could blow inadequate speakers if played too loud. It is recommended
that input levels to external equipment (mixers, amp's etc.) are kept low when first connected, and
then slowly increased to a useable level.
MAINTENANCE INSTRUCTIONS
Any cleaning of the synthBlock case should be done with a clean lint-free cloth.
DO NOT USE SOLVENTS OR CLEANERS, as this will deteriorate the exterior appearance of the
equipment. Do not use a car wash or jet wash to clean this synth.
PLACE
Place synthBlock soundly on a stable surface so it cannot fall off or over, causing it or yourself
injury.
POWER
The unit needs a 12 DC supply, minimum 300mA. Centre positive.
