background image

analogue solutions

  Semblance/4Voice  V2 

e&oe (c) 21-10-2004

                 

The following sections apply to the Semblance specifi cally, but in gen-
eral also to the and single voice of the 4Voice too.

INITIAL TUNING

Once the MIDI and audio connections have been made it may be neccessary to tune 

in the VCOs to the rest of your music set-up. Allow a fi ve minute warm up time.

First set up the controls of Semblance to make a simple sound. It is usually best to 

leave the VCA at ON. Turn VCO2 to zero volume so you can only hear VCO1.

Play, say middle C on the keyboard. Using a digital keyboard as a reference, adjust 

the course or fi ne tuning of VCO1 until it plays in tune with your reference.

Finally, turn up VCO2 so both VCOs can be heard. Using the tune controls of VCO2, 

tune it to VCO1.

CIRCUITS IN DETAILS

Here follows details on all the sockets and controls, with brief simplifi ed explanations 

of what the circuits do. We have not gone into technical details on how and exactly what  
each circuit does but tried to explain each control's function and effect.

Anyone who has used synthesisers before should be familiar with the terms used and 

therefore be able to predict their behaviour and how they affect the sound. The best way 
to learn how to use Semblance is to go straight ahead and play with it. Reading of this 
manual may only be neccessary for fi ner operational detail.

Содержание 4Voice


































Отзывы: