Vertige™
- Ref. VRC300
QUICK START GUIDE
Thank you for choosing
Analog Way
and the
Vertige™
. By following these simple steps, you will be able to
setup and use within minutes your powerful high-end Remote Controller.
Vertige™
is a revolutionary Remote
Controller integrating new ways of creating and managing large events and multi-venues. The
Vertige™
brings
a simple and flexible approach to show creation and management.
Vertige™
can control several screens and
multiple
LiveCore™
devices (
Ascender 48 - 4K - PL
,
Ascender 32 - 4K - PL
,
Ascender 16 - 4K
,
SmartMatriX Ultra
,
NeXtage 16 - 4K
,
NeXtage 08 - 4K
), independently or linked with an identical device (additive modularity),
linked with an expansion module, or synchronized (associative modularity).
Vertige™
can also control other
devices over IP, such as Midra switchers, matrix routers, media players, PTZ cameras.
• 1 x
Vertige™ (VRC300)
• 2 x Power supply cord
s
• 1 x User manual (PDF version)*
• 1 x Quick start guide (PDF version)*
* User manual and Quick start guide are available on
www.analogway.com.
REAR PANEL DESCRIPTION
Read the following sections in the given order to
get started with
Vertige™
:
• Rear panel description
• Front panel description
• Setting up the
Vertige™
• Configuring a Show
• Running a Show
If connecting the
Vertige™
and the devices directly,
make sure to use an Ethernet crossover cable (the
Vertige™
connects to the controlled devices with
standard Ethernet LAN networking equipment).
Otherwise you can use a standard Ethernet hub
and straight cables.
1. Power Supply:
Dual, redundant power supply with fuse as standard
equipment.
2. On/Off button:
Switch on/off the device.
3. Connection panel:
Ethernet LAN adapters for device control.
1
2
3
Go to our website to register your product(s)
and be notified about new firmware versions:
http://bit.ly/AW-Register
WHAT’S IN THE BOX
GETTING STARTED WITH THE VERTIGE™
