ANALOG WAY
SMS100 - ED 07/01
PAGE 7
5) STARTING
IMPORTANT : Please read all of the Safety Instructions (pages 2 & 3) before starting.
c
Turn OFF all of your equipment before connecting,
d
Connect the AC Power supply cord to the SMART SCALER™ and to a AC power outlet,
e
Connect your video sources (VCR, DVD, camera, laser disc, ...) to the C.V1, C.V2, S.VIDEO 1, S.VIDEO 2 and
RGB.SYNC or COMPONENT (R-Y, Y, B-Y) inputs,
f
Connect your computer source to the COMPUTER INPUT,
g
Connect the DATA INPUT of your display device (data projector, plasma screen,...) on the "DISPLAY OUTPUT"
of the SMART SCALER™,
h
Turn ON all of your input sources, the SMART SCALER™ (front panel switch) and then your display device.
i
Select a source with the front panel key to display this source in output (LED turned ON).
•
COMPOSITE VIDEO INPUTS (C.V1 & C.V2)
The Composite Video signal, usually called COMPOSITE or VIDEO, is available on the most video
equipment (VCR, DVD, CAMERA…), but is also the lowest in picture quality. The video standard of this signal could
be NTSC, PAL or SECAM. The signal is transmitted by a single coaxial cable, and is connected to the video equipment
with a RCA or BNC connector.
CONNECTION
