ANALOG WAY
PAGE 16
SMS100 - ED 07/01
7) OPERATING MODE
7-1) INSTALLATION (Please see section 3 & 5).
7-2) SETTINGS
c
We recommend to reset the SMART SCALER™ to all of its default values, with the LCD menu # 4-5, before
beginning
d
Select the type of video signal connected to the RGB/YUV input (LCD menu # 1-3).
e
Select the type of screen (4/3 or 16/9) in LCD menu # 2-4.
f
Select the output sync. type which correspond to your display device (LCD menu # 2-1).
g
Select the synchronization mode (LCD menu # 2-3). Please see the synchronization mode table below.
h
Select an Output Format (LCD menu # 2-4). Please see the synchronization mode table below.
NOTE
: For fixed panel display device (DMD, LCD, PLASMA…), select always the output format corresponding to
the native resolution of your display device. Thus, the display device will not have to scale the image and the
result will be better.
SYNCHRONIZATION MODE TABLE
THE SCALER FOLLOW MODE
(LCD menu # 2-3= VIDEO IN RATE)
THE SCALER MODE
(LCD menu # 2-3 = INTERNAL RATE)
APPLICATIONS
Movie and motion pictures display.
Video presentation (static pictures).
OUTPUT RATE
Locked on the Frame Rate of the selected video input
(50 Hz if PAL or SECAM and 59.94 Hz if NTSC)
Generated by the SMART SCALER ™ (60 Hz
or 75 Hz)
•
640 x 480 (4/3 - VGA at 50 or 59.94 Hz)
•
VGA (640 x 480) at 60 Hz or 75 Hz
•
852 x 480 (16/9 - Plasma 42” at 50 or 59.94 Hz)
•
PLASMA 42" (852 x 480) at 60 Hz or 72 Hz
•
800 x 600 (4/3 - SVGA at 50 or 59.94 Hz)
•
SVGA (800 x 600) at 60Hz or 75Hz
•
1024 x 768 (4/3 - XGA2 at 50 or 59.94 Hz)
•
MAC (640 x480) at 66Hz or 75Hz
•
1280 x 720 (16/9 - HDTV at 50 or 59.94 Hz)
•
XGA2 (1024 x 768) at 60Hz or 75 Hz
•
1280 x 768 (16/9 - Plasma 50” at 50 or 59.94 Hz)
•
PLASMA 50" (1280 x 768) at 56 Hz or 75 Hz
•
1280 x 960 (4/3 - Line quadrupler at 50 or 59.94 Hz)
•
SXGA (1280 x 1024) at 60 Hz or 75 Hz
•
1280 x 1024 (4/3 - SXGA at 50 or 59.94 Hz)
OUTPUT FORMAT
AVAILABLE
(LCD menu # 2-2)
•
1365 x 1024 (4/3 - D-ILA at 50 or 59.94 Hz)
7-3) IMAGE ADJUSTMENTS
For all input sources connected to the SMART SCALER™, make the following adjustments: :
c
Select the aspect ratio of your input source (LCD menu #3-6)
d
Adjust the vertical and horizontal position (LCD menu # 3-1 & 3-2)
e
Make the others adjustments, if necessary, available in LCD menu # 3 (color, brightness, image process…)
NOTE
: The image adjustments are only active for the selected video input.
NOTE
: To preset your image adjustment, select one video to display in output, then use the LCD
menu # 3-12 (Preset).
