12/13/2013 - RK-350-QSG
Code: 140153
The
RK-350
allows for remote control of all available Midra™ device features. Please check your device ma-
nual for more information on device operation and usage. Please check our website for further information:
www.analogway.com
All
Analog Way
products have a 3 year warranty on parts and labor, back to factory, but does not include
faults resulting from user negligence, special modifications, electrical surges, abuse (drop/crush), and/or
other unusual damage.
Please note:
The included carrying case and protective foam is not covered under warranty.
WARRANTY AND SERVICE
GOING FURTHER WITH THE RK-350
Technical support:
Europe, Middle East & Africa
Tel.: +33 (0)1 81 89 08 76
The Americas
Tel.: +1 212 269 1902
Asia Pacific
Tel.: +65 6292 5800
RK-350 - REF. RK-350
/ REAR PANEL DESCRIPTION
Allow to secure with a
Kensington™ Lock
RJ-45 Connector:
connect the RK-350 to a 10/100 BT Ethernet LAN using this
female RJ-45 connector: used to control the switcher and also to upgrade the
RK-350. Please see the updater software instructions for more information.
(Crossover cable for a direct link between RK-350 unit and Midra™ device, or a
straight through cable with a hub)
RS-232 PORT:
this 9-pin Female D connector provides RS-232 port serial
communication with the switcher and also to upgrade the RK-350. A DB9 F/F
crossover cable (not supplied) is required for an RS232 update. This port can
also provide power to operate the RK-350 when connected to a switcher
NOTE:
The latest firmware upgrade is always available on
www.analogway.com
DC Power connector:
Plug a Jack coaxial 5.5
- 2.1 - 9mm - external
GND. 9/12 Vdc - 1A.
