Analog Technologies ALDD28V15A401, Быстрый старт

Страница: 8 / 10

1161 Ringwood Ct, #110, San Jose, CA 95131, U. S. A. Tel.: (408) 748-9100, Fax: (408) 770-9187 www.analogtechnologies.com

Copyrights 2000-2021, Analog Technologies, Inc. All Rights Reserved. Updated on 3/11/2021 Email: staff@analogti.com/sales@analogti.com 8
Analog Technologies
ALDD28V15A401
Digital High Voltage Constant Current 15A Laser Driver
WORKING PRINCIPLE
1. After the controller is powered on, turn the switch on the
lower right to “SB”, the display contents are as follows:
2. Press the “Set” button, enter the password, and then enter
the setup mode.
Press the “Set” button, the display contents are as follows:
Two digits stand for the password. When the last digit
flashes, use “
↑ ” to change the number (0 ~ 9); press the “Set”
button to select which digit to be changed. When the first
digit flashes, use “
↑ ” to change the number (0 ~ 9). The
default password is "99". Once you enter the correct
password, you can start setting up the controller.
3. After entering the correct password, press and hold the
“Set” button to enter the setup mode. The display contents
are as follows:
We can select internal control or external control by pressing
the “
↑ ” button, then press the “Set” button to lock the
selection, or press and hold the “Set” button to enter the
internal control or external control current setting.
The current can be adjusted by pressing the “Set” button to
place the cursor. Use the "
↑ " button to adjust the current.
Or
After setting the current, press and hold the “Set” button to
save the setting and exit to the initial state.
Press “
↑
” button to switch between the connection state and
temperature state