Evaluation Board User Guide
UG-XXX
EVAL-AD7124-8SDZ QUICK START GUIDE
To begin using the evaluation board, do the following:
1.
With the EVAL-SDP-CB1Z board disconnected from the
USB port of the PC, install the AD7124-8 evaluation board
software from the CD included in the evaluation board kit.
The PC must be restarted after the software installation is
complete. (For complete software installation instructions,
see the Software Installation Procedures section.)
2.
Connect the
board to the EVAL-AD7124-
8SDZ board.
a.
Screw the two boards together using the plastic screw-
washer set included in the evaluation board kit to
ensure that the boards are connected firmly together.
3.
Apply an external voltage in the range of 7 V to 9 V to the J3
or J5 connecter of the EVAL-AD7124-8SDZ board. This
provides the power supply for the board.
4.
supplied USB cable. If you are using Windows® XP, you may
need to search for the
drivers. Choose to
automatically search for the drivers for the
board if prompted by the operating system.
5.
Launch the EVAL-AD7124-8SDZ software from the
Analog
Devices
subfolder in the
Programs
menu.
Rev. PrA | Page 3 of 36
Содержание UG Series
