Analog Devices SHARC EZ-Extender, Руководство пользователя

Страница: 16 / 33

Breadboard Area
1-2 SHARC EZ-Extender Manual
Switch (SW1)” on page 2-3 . The setup of the general-purpose signals
DAI_P15_GP1
and
DAI_P16_GP2
is dependent on the specific ADC HSC
evaluation board being interfaced; therefore, the board’s model must be
taken into consideration.
The data bus of the EZ-Extender must be enabled before data is read.
Enable the data bus by a memory read from address
0x160 0000
, which
the
AD[15:0]
pins set up as the external port. Then, the
AD[15:0]
pins can
be set up in PDAP mode.
To learn more about Analog Devices data converters, go to
www.analog.com
.
Breadboard Area
SHARC EZ-Extender broadens the range of the EZ-KIT Lite applications
by providing surface mounted (SMT) footprints for breadboard capabili-
ties and access to all of the pins on the EZ-KIT Lite’s expansion interface.