6
dc2691af
DEMO MANUAL DC2691A
QUICK START PROCEDURE
7. Click the Program and Verify button, and wait for the
process to complete.
a. LTpowerPlay is ready to program/verify the device.
Figure 7. Ready To Program
b. After the process is complete, you will see “Success-
fully Programmed and Verified Device” in the status
bar at the bottom.
Figure 8. Successfully Programmed
8. Prior to removing the device from the socket, set the
power switch, S1, to the off position to remove power
from the device. The USB ribbon cable may remain
connected to programing board.
9. To program another device, repeat Steps 3 through 5,
then Steps 7 and 8. LTpowerPlay’s Programming Utility
does not need to be closed.
