Analog Devices HPPCI, Руководство пользователя

Страница: 16 / 41

Attaching the Cable to the Emulation Target
1-6 HPUSB, USB, and HPPCI Emulators User’s Guide

Attaching the Cable to the Emulation
Target
The final step is to connect the 14-pin header side of the pod cable to the
target board via the debug interface. The 14-pin connector is keyed at
pin 3 on the pod cable to ensure that the cable sits correctly on the 14-pin
target emulation header. The target board should also have pin 3 keyed.

Never connect or disconnect a USB emulator JTAG header,
whether powered up or not, to/from a powered target.
The following procedures apply only to USB-based emulators.
Powering Up/Down an HPUSB or USB Emulator
To power up the USB-based emulator:
1. Apply power to target board.
2. Apply power to ICE.
3. Connect the USB cable between the ICE and the PC.
4. Invoke Vi+.
To power down the USB-based emulator:
1. Shut down (exit) Vi+.
2. Disconnect the USB cable between the ICE and the PC.