Analog Devices Hittite HMC-T2220, Быстрый старт

Страница: 5 / 10

3
D. Connect to PC
• USB
If you are using USB, please install the driver BEFORE connecting the Signal Generator. Connect a USB cable
(not supplied) between the port at the rear of the unit and a PC.
If you are using GPIB or Ethernet, you do not need the driver on the CD.
Note: You will need a USB connection temporarily to confi gure the Ethernet.
(See the Programmer’s Manual for additional information)
• GPIB
Connect cable to a PC.
• Ethernet
Connect cable to a PC.
E. Software Installation
When installing the software from the CD, follow the directions provided by the installation program. See below
for general installation process.
If you already have the HMC-T2XXX GUI and USB Driver installed on your PC, you will see the following
message:
Press “Yes” to continue.
If you agree to the terms of the license agreement, select “I have reviewed and I accept the terms of the Hittite
End User Software License Agreement.”, then click Next to proceed. If you do not agree, do not install the
software. You do not need the GUI software if you are not using USB. The documentation can be downloaded
from www.tm-hittite.com.