Analog Devices EZ-Extender Analog 120-Pin Probing Board, Руководство пользователя

Страница: 3 / 29

Regulatory Compliance
The PWM 180-Pin Probing Board is designed to be used solely in a labo-
ratory environment. The board is not intended for use as a consumer end
product or as a portion of a consumer end product. The board is an open
system design which does not include a shielded enclosure and therefore
may cause interference to other electrical devices in close proximity. This
board should not be used in or near any medical equipment or RF devices.
The PWM 180-Pin Probing Board is in the process of being certified to
comply with the essential requirements of the European EMC directive
2004/108/EC and therefore carries the “
CE ” mark.
The probing board contains ESD (electrostatic discharge) sensitive devices.
Electrostatic charges readily accumulate on the human body and equipment
and can discharge without detection. Permanent damage may occur on
devices subjected to high-energy discharges. Proper ESD precautions are
recommended to avoid performance degradation or loss of functionality.
Store unused probing boards in the protective shipping package.