Bluetooth EZ-Extender Manual
2-9
Bluetooth EZ-Extender Hardware Reference
STAMP UART Connector (J1)
The STAMP UART connector (
J1
) allows the Bluetooth EZ-Extender to
be plugged onto an EZ-KIT Lite development board supporting a
STAMP interface. The
J1
connector is located on the bottom side of the
board. For availability and pricing of the connectors, contact Samtec.
Refer to
“Expansion Interface” on page 1-6
or more information.
Expansion Interface II Connector (J3)
The board-to-board connector (
J3
) provides signals for the SPI, TWI,
UART, SPORT interfaces and general-purpose I/O (GPIO) signals of the
mating EZ-Board. The connector is located on the bottom side of the
board. For availability and pricing of the connectors, contact Samtec.
Refer to
“Expansion Interface” on page 1-6
for more information.
Part Description
Manufacturer
Part Number
10-position 0.1”, SMT socket
SAMTEC
SSW-105-22-F-D-VS
Mating Connector
10-position 0.1’’, SMT header
SAMTEC TSSH
TSSH-105-01-L-DV-A
Part Description
Manufacturer
Part Number
50-position 0.1’’, SMT socket
SAMTEC
SSW-125-22-F-D-VS
Mating Connector
50-position 0.1’’, SMT header
SAMTEC
TSSH-125-01-L-DV-A
Содержание EZ-EXTENDER 82-000218-01
Страница 4: ......
Страница 8: ...CONTENTS viii Bluetooth EZ Extender Manual...
Страница 34: ...Connectors 2 12 Bluetooth EZ Extender Manual...