Analog Devices EVAL-SSM6515, Руководство пользователя

Страница: 5 / 23

User Guide EVAL-SSM6515
HARDWARE DESCRIPTION
analog.com Rev. 0 | 5 of 23
Table 1. Connector and Jack Descriptions
Reference
Designator
Type Functional Name Description
S3 Single pole double throw
(SPDT) slide switch S/PDIF source select Select the optical S/PDIF input or coaxial S/PDIF input.
S4 Momentary switch S/PDIF reset button Push S4 to reset the S/PDIF receiver.
U4 Optical fiber connector S/PDIF optical input S/PDIF optical input.
J13 (I
2
S Input Selection Header)
The J13 is a 9-pin header. Pin 1, Pin 4, and Pin 7 of J13 are
GND, whereas Pin 2, Pin 5, and Pin 8 are used as signal inputs.
The outermost pins, Pin 3, Pin 6, and Pin 9, are connected to the
S/PDIF receiver I
2
S outputs. See Table 2 for the pin connections.
The I
2
S signals must be 1.8 V p-p.
Table 2. J13 9-Pin (3×3) Header Connections
Pin
Signal Test Conditions/Comments
1, 4, 7 GND GND
2 SDATA SSM6515 serial data input
5 FSYNC SSM6515 frame sync input
8 BCLK SSM6515 bit clock input
3 SDATA S/PDIF S/PDIF serial data output
6 FSYNC S/PDIF S/PDIF frame sync output
9 BCLK S/PDIF S/PDIF bit clock output