EVAL-ADV7180EB Application Note Video Group Limerick
Figure 1. ADV Register Software Configuration.
4.
Ensure the options are set, as shown in Figure 1, and click on the OK button.
When the register control software starts, it firstly initializes all the selected
devices and then loads the reset defaults for each device. I
2
C control and reset
signals are connected to the evaluation board through the USB cable. This cable
should be connected to the evaluation board before the application software is
started.
Configuring ADV7180 Modes Using Script Files
To enable easy and efficient evaluation, the ADV Register Control software is provided
with script files that can be used to program the evaluation board’s decoder and encoder
into preset configurations. Figure 2 illustrates how a script file can be accessed and
selected from the drop down menu
Rev.B November 2009
Analog Devices B.V.
4 of 54
