Evaluation Board User Guide
UG-477
One
Technology Way • P.O. Box 9106 • Norwood, MA 02062-9106, U.S.A. • Tel: 781.329.4700 • Fax: 781.461.3113 •
Four ADC, Two DAC Low Power Codec
with Audio Processor
PLEASE SEE THE LAST PAGE FOR AN IMPORTANT
WARNING AND LEGAL TERMS AND CONDITIONS.
Rev. A | Page 1 of 28
PACKAGE CONTENTS
evaluation board
(USBi) communications adapter
USB cable with Mini-B plug
Evaluation board/software quick start guide
DOCUMENTS NEEDED
data sheet
Applications Note,
Using the
GENERAL DESCRIPTION
This user guide explains the design and setup of the
evaluation board.
This evaluation board provides full access to all analog and digital
I/Os on the
core is controlled by
Analog Devices, Inc., SigmaStudio™ software, which interfaces to
the board via a USB connection. The
can be
powered by a single AAA battery, by the USB bus, or by a single
3.8 V to 6 V supply; any of these are regulated to the voltages
required on the board. The printed circuit board (PCB) is a 4-layer
design, with a single ground plane and a single power plane on the
inner layers. The board contains connectors for external micro-
phones and speakers. The master clock can be provided externally
or by the on-board 12.288 MHz passive crystal.
EVALUATION BOARD TOP SIDE AND BOTTOM SIDE
1
1023-
001
Figure 1.
Evaluation Board Top Side
1
1023-
002
Figure 2.
Evaluation Board Bottom Side