Analog Devices EVAL-ADuCM420QSP1Z, Руководство по началу работы

Страница: 9 / 20

EVAL-ADUCM420QSP1Z User Guide UG-1926
Rev. 0 | Page 9 of 20
LIBRARY AND PROJECT OPTIONS FOR ADUCM420
IN KEIL µVISION5
The Keil µVision5 project files are placed in the Arm folder for
each example program. For example,
C:\Analog Devices\
ADuCM420\examples\M420_Adc\ARM\M420_Adc.uvporjx
is the file that is opened by Keil. By clicking the Manage Run-
Time Environment icon from the Keil settings menu (see
Figure 9), users can select the components needed from
Peripheral Libraries in their project, as shown in Figure 11.
25844-
108
Figure 9. Manage Run-Time Environment Icon
IAR IDE PROJECT SETTINGS
It is recommended for first time users to open an example project
from the examples folder. For instance, the
M420_Adc.eww file
is the IAR Embedded Workbench® project file for the ADC
example, and it can be opened from the
C:\Analog Devices\
ADuCM420\examples\M420_Adc\IAR\ folder.
Opening an example file allows compilation, programming, and
debugging without any configuration changes from the user.
If creating a new IAR-based project, the following steps must be
completed to run the
ADuCM420 example programs properly:
1. From the Project menu, select Options .
2. Click the General Options category, and ensure the
selected device is Analog Devices ADuCM420 under the
Target tab.
25844-
1
10
Figure 10. IAR Project Setting
25844-
109
Figure 11. Peripheral Libraries