Analog Devices EVAL-ADPD144RI, Руководство пользователя

Страница: 4 / 10

UG-1272 EVAL-ADPD144RIZ-SF User Guide
Rev. 0 | Page 4 of 10
ACQUIRING DATA
RUNNING THE APPLICATIONS WAVETOOL
To start the Applications Wavetool, navigate to the Start
menu > Analog Devices > ApplicationsWaveTool and click
ApplicationsWavetool .
USB UART CONNECTION
To establish the connection, follow the menu path Connection >
Connect > UART Bridge .
Figure 5. UART Connect
Select the proper COM port to connect the Applications Wavetool
to the device. If connection via Bluetooth® is required, or if
there are any other connection issues, refer to the Applications
Wavetool user guide that is provided in the software package
download.
SELECTING THE PROPER VIEW
The ADPD144RI is intended for nonwrist-based PPG
measurements. Click the ADPD Device data view (see Figure 6)
to open a window that allows the user to run the ADPD144RI
device and collect data (see Figure 7).
Figure 6. Click ADPD Device
LOAD CONFIGURATION
In the upper right corner of the data view window, click ADPD
Config to open the ADPD Config window shown in Figure 7.
Click Load DCFG to choose a configuration file. For PPG
measurements, choose the 144RI_earbud.dcfg configuration file.
Figure 7. ADPD Config View
166
16-
00
9
167
37-
014
1673
7-
015