Analog Devices EVAL-ADN4680EEBZ, Руководство пользователя

Страница: 7 / 12

User Guide EVAL-ADN4680E
EVALUATION BOARD CONFIGURATION
analog.com Rev. 0 | 7 of 12
Table 4. Jumper Configurations
Jumper
Position Description
Disconnected Disconnects the DE1 pin from VCC or GND, which allows the DE1 pin to be controlled from the DE1 connection on
the P3 screw terminal block.
DE2 VCC Connects the DE2 pin of the ADN4680E to VCC, which enables the A2 and B2 transmitter if the ENP jumper is
connected to VCC.
GND Connects the DE2 pin of the ADN4680E to GND, which disables the A2 and B2 transmitter, placing it in a high
impedance state.
Disconnected Disconnects the DE2 pin from VCC or GND, which allows the DE2 pin to be controlled from the DE2 connection on
the P3 screw terminal block.
DE3 VCC Connects the DE3 pin of the ADN4680E to VCC, which enables the A3 and B3 transmitter if the ENP jumper is
connected to VCC.
GND Connects the DE3 pin of the ADN4680E to GND, which disables the A3 and B3 transmitter, placing it in a high
impedance state.
Disconnected Disconnects the DE3 pin from VCC or GND, which allows the DE3 pin to be controlled from the DE3 connection on
the P5 screw terminal block.
DE4 VCC Connects the DE4 pin of the ADN4680E to VCC, which enables the A4 and B4 transmitter if the ENP jumper is
connected to VCC.
GND Connects the DE4 pin of the ADN4680E to GND, which disables the A4 and B4 transmitter, placing it in a high
impedance state.
Disconnected Disconnects the DE4 pin from VCC or GND, which allows the DE4 pin to be controlled from the DE4 connection on
the P5 screw terminal block.