Analog Devices EVAL-ADMV4640, Руководство пользователя

Страница: 3 / 10

User Guide EVAL-ADMV4640
EVALUATION BOARD HARDWARE
analog.com Rev. A | 3 of 10
The EVAL-ADMV4640Z comes with an on-board ADMV4640 chip.
When evaluating the ADMV4640 device, connect the IF input to
an RF signal generator. The EVAL-ADMV4640Z runs on a 5 V dc
supply. Connect the 5 V dc supply to the VCC_5V test point, and
the ground to the GND1 test point.
Figure 2 shows the block diagram of the EVAL-ADMV4640Z lab
bench setup.
Figure 2. Lab Bench Setup