UG-105
Evaluation Board User Guide
Rev. A | Page 6 of 16
2.
Click
Update Driver
in the properties window (see
Figure 8. Unknown Device Properties
3.
On the
Update Driver Software
dialog box, choose
Browse my computer for driver software
.
4.
Browse to
C:\Program Files\Analog Devices\ADF4360
.
5.
Click
OK
or
Next
.
6.
If prompted by Windows security, choose
Install this
driver software anyway.
7.
If the installation is successful, the message in Figure 9
appears.
Figure 9. Successful Installation
WINDOWS 7 (64-BIT) OS
Windows 7 64-bit uses a different driver than 32-bit systems. To
install this driver:
1.
Disconnect the USB evaluation board.
2.
Open
ADF4360_setup.msi
.
3.
The install wizard guides you through the installation
process. The software is installed in a default directory called
C:
/
Program Files
/
Analog Devices
/
ADF4360
.
4.
Connect your USB evaluation board. The driver should be
found automatically.
Note that installing this driver package disables older versions
of Analog Devices PLL software; therefore, only install if needed.
088
92-
0
08
08
89
2-
0
09
www.BDTIC.com/ADI