Evaluation Board User Guide
UG-477
Rev. A | Page 9 of 28
DOWNLOADING THE PROGRAM TO THE DSP
To compile and download the code to the DSP, click the
Link-Compile-Download
button once in the main toolbar
of SigmaStudio (see Figure 28). Alternately, press the
F7
key.
1
1023-
027
Figure 28. Link-Compile-Download Button
If the project does not compile correctly, an error displays (see
Figure 29). If this occurs, go back and check your work for
mistakes.
1
1023-
028
Figure 29. Compile Error
The signal flow should now be running on the evaluation board,
and the audio should pass from the input to the output. The
volume can be changed in real-time by using the buttons on
the board.
