Analog Devices EVAL-AD7383FMCZ, Руководство пользователя

Страница: 3 / 16

EVAL-AD7383FMCZ Evaluation Board User Guide UG-1770
Rev. A | Page 3 of 16
EVALUATION BOARD QUICK START GUIDE
The EVAL-AD7383FMCZ is powered by the SDP-H1 by default.
External power supplies can be applied to the EVAL-
AD7383FMCZ. See Table 1 for a description of the optional
external power supply connectors and Table 2 for the required
link option function descriptions. Take the following steps to
evaluate the
AD7383 :
1. Download and install the ACE software, which is available
on the ACE software page or the AD7383 product page.
Details of the ACE installation are available on the internal
label of the EVAL-AD7383FMCZ box. When installing the
ACE software, ensure that the SDP-H1 is disconnected
from the USB port of the PC. The PC may need to be
restarted after the installation.
2. Ensure that the link options are configured as detailed in
Table 2.
3. Connect the SDP-H1 to the EVAL-AD7383FMCZ, as
shown in Figure 2.
4. Connect the SDP-H1 to the PC via the USB cable. If
prompted by the operating system, choose to automatically
search for the SDP-H1 drivers.
5. Launch the ACE software from the following location:
C:\Program Files (x86)\Analog Devices\ACE .
6. Connect an analog signal to Channel A or Channel B of
the AD7383 via J2 for Channel A and J4 for Channel B.
The A
IN
A− and A
IN
B− inputs are directly connected to
VCM on the EVAL-AD7383FMCZ.
2
3397-
002
Figure 2. EVAL-AD7383FMCZ (Left) Connected to the SDP-H1 (Right)