UG-450
EVAL-AD7276SDZ User Guide
Rev. 0 | Page 4 of 20
SOFTWARE INSTALLATION PROCEDURES
The
EVAL-AD7276SDZ
evaluation kit includes a CD containing
software to be installed on your PC before you begin using the
evaluation board.
There are two parts to the installation:
•
AD7276
evaluation board software installation
•
EVAL-SDP-CB1Z
system demonstration platform board
drivers installation
Warning
The evaluation board software and drivers must be installed
before connecting the evaluation board and
EVAL-SDP-CB1Z
board to the USB port of the PC to ensure that the evaluation
system is correctly recognized when it is connected to the PC.
Installing the
AD7276
Evaluation Board Software
To install the
AD7276
evaluation board software,
1.
With the
EVAL-SDP-CB1Z
board disconnected from the
USB port of the PC, insert the installation CD into the CD-
ROM drive.
2.
Double-click the setup.exe file to begin the evaluation
board software installation. The software is installed to the
following default location: C:\Program Files\Analog
Devices\EVAL-AD7276_77_78SDZ\AD7276.
3.
A dialog box appears asking for permission to allow the
program to make changes to your computer. Click Yes.
Figure 3.
AD7276
Evaluation Board Software Installation:
Granting Permission for Program to Make Changes
4.
Select the location to install the software, and then click Next.
Figure 4.
AD7276
Evaluation Board Software Installation:
Selecting the Location for Software Installation
5.
A license agreement appears. Read the agreement, and then
select I accept the License Agreement and click Next.
Figure 5.
AD7276
Evaluation Board Software Installation:
Accepting the License Agreement
10941-
003
10941-
004
10941-
005
