Analog Devices EVAL-AD5680DBZ, Руководство пользователя

Страница: 4 / 12

UG-989 EVAL-AD5680DBZ User Guide
Rev. 0 | Page 4 of 12
10954-
003
EVALUATION BOARD SOFTWARE QUICK START PROCEDURES
INSTALLING THE SOFTWARE
The EVAL-AD5680DBZ evaluation software is compatible with
Windows® Vista (64-bit/32-bit), and Windows 7 (64-bit/32-bit).
The software must be installed before connecting the SDP-B board
to the USB port of the PC to ensure that the SDP-B board is
recognized when it is connected to the PC.
To install the EVAL-AD5680DBZ software, take the following
steps:
1. Start the Windows operating system. Download the
installation software from the
EVAL-AD5680DBZ
evaluation board page.
2. Run the setup.exe file from the installer folder if it does not
open automatically.
3. After installation is complete, power up the EVAL-
AD5680DBZ evaluation board as described in the
Motherboard Power Supplies section.
4. Connect the EVAL-AD5680DBZ evaluation board to the
SDP-B board and the SDP-B board to the PC using the
USB cable included in the evaluation kit.
5. When the software detects the evaluation board, click
through any dialog boxes that appear to finalize the
installation.
RUNNING THE SOFTWARE
To run the EVAL-AD5680DBZ program, take the following
steps:
1. Connect the EVAL-AD5680DBZ evaluation board to the
SDP-B board and connect the USB cable between the SDP-B
board and the PC.
2. Power up the EVAL-AD5680DBZ evaluation board as
described in the Motherboard Power Supplies section.
3. From the Start menu, click All Programs, Analog Devices,
AD5680 Evaluation Software
.
4. If the SDP-B board is not connected to the USB port when
the software is launched, a connectivity error displays (see
Figure 2). Connect the
EVAL-AD5680DBZ evaluation board
to the USB port of the PC and wait a few seconds. When
the
SDP-B board is detected, the display is updated (see
Figure 3).
Alternatively, the EVAL-AD5680DBZ evaluation software can
be used without an evaluation board. The EVAL-AD5680DBZ
evaluation software runs in simulation mode, displaying expected
outputs based on the input data. The main window of the
EVAL-
AD5680DBZ evaluation software then opens, as shown in
Figure 4.
1
4528
-002
Figure 2. Connectivity Error
1
452
8-
00
3
Figure 3. Hardware Select