UG-791
Rev. 0 | Page 5 of 14
EVALUATION BOARD SOFTWARE
is included in
the evaluation kit on a CD. To install the software, follow the
on-screen instructions.
To run the software, click the
ADF5904
file on the desktop or
from the
Start
menu.
In the
Select Device and Connection
tab, select the device and
the connection method, and click
Connect.
Confirm that
Analog Devices Eval Board connected
is
displayed at the bottom left of the window (see Figure 2).
Otherwise, the software has no connection to the evaluation
board.
Note that, when connecting the board, it takes approximately
5 sec to 10 sec for the status label to change.
Figure 2. Software Front Panel Display—Select Device and Connection
1289
5-
00
2
