EV-ADF4356SD1Z User Guide
UG-1062
Rev. A | Page 3 of 13
GETTING STARTED
SOFTWARE INSTALLATION PROCEDURES
See the
control software. For the software installation procedure, see
the
PLL Software Installation Guide
EVALUATION BOARD SETUP PROCEDURES
To run the software,
1.
Click the
ADF4356
file on the desktop or from the
Start
menu.
2.
On the
Select Device and Connection
tab, choose
ADF4356
and
SDP board (black)
, and then click
Connect
(see Figure 2).
3.
When connecting the board, allow 5 sec to 10 sec for the
label on the status bar to change.
Under the
File
menu, the current settings can be saved to, and
loaded from, a text file.
15087-
002
Figure 2. Software Front Panel Display—Select Device and Connection
