Analog Devices DC2685A, Демонстрационное руководство

Страница: 8 / 22

8
UG-1339 Rev 0
DEMO MANUAL DC2685A
Table 5. DC590 Jumper Selection. Refer to the DC590 Demo Manual for Further Details.
JUMPER
SETTING OPERATION
JP1 PROG Microcontroller in-circuit programming header. Do NOT install jumper; make no
connections.
JP2 MODE Do NOT install jumper; make no connections.
JP3 Watchdog Enables Do NOT install jumper; make no connections.
JP4 EE Jumper MUST be in the EN position.
JP5 SW
(Right Hand Side)
MUST be in the ON position.
See Connections section.
ISO
(Left Hand Side)
Controls the isolated supply.
See Connections section.
JP6 VCCA Control See Connections section.
SUPPLEMENTARY