Analog Devices ADZS-BF707-BLIP2, Руководство пользователя

Страница: 33 / 60

ADZS-BF707-BLIP2 Board Evaluation System Manual 2-3
ADZS-BF707-BLIP2 Board Hardware Reference
OVM7692 is a camera module made by Omnivision. It packages an
OV7692 imaging sensor with a lens.
The ADZS-BF707-BLIP2 board has a 24 MHz input clock and runs at
384 MHz internally.
USB circuitry and a micro USB AB connector enable the BLIP2 board to
connect to a host. The clock for the USB circuit is generated by a 24 MHz
oscillator.
An FT232RQ device from Future Technology Devices International and a
USB Mini-B connector allow the UART1 port of the ADSP-BF707 pro-
cessor to connect to a USB port of a host.
The SD connector enables plug-in of an SD card or a WiFi module that
supports SD card interface.
The RF Wireless connector allows the connection of the BLIP2 board to
an Analog Devices Inc. Wireless Sensor Network (WSN) Cluster Board.
Alternatively, it can be used as a general-purpose connector for the SPI1
port, 3.2V supply, and ground. Note that any SPI1 pin can also be config-
ured as GPIO.
See ADZS-BF707-BLIP2 Board Schematic and the Wireless Sensor Net-
work (WSN) cluster board EV-ADRN-WSN-2ZWSN for more
information.