Analog Devices ADV7281-M, Руководство по установке

Страница: 10 / 12

ADV7281-M Installation Guide
Rev. A, March 2013 10
Figure 6. DVP Eval Program After Loading ADV7281-M Board
Note
: A warning message similar to that shown in Figure 7 appears. This is expected as the I 2 C slave address of the CSI_Top
map has not yet been programmed. This warning will disappear after any script is run (see step 7).
Figure 7. Warning Message That Appears After Loading ADV7281-M Board
Selects ADV7281-M
Selects Main Map
of ADV7281-M
Selects
Interrupt/VDP Sub
Map of ADV7281-M
Selects
User Sub
Map 2 of
ADV7281-M
ALSB pin of
ADV7281-M tied
high on evaluation
board. Therefore,
I
2
C device address
of ADV7281-M set to
0x42.
Selects MIPI
CSI-2 Map of
ADV7281-M