ADuCM362/ADuCM363 Getting Started Guide
UG-1071
One
Technology
Way
•
P.O.
Box
9106
•
Norwood,
MA
02062-9106,
U.S.A.
•
Tel:
781.329.4700
•
Fax:
781.461.3113
•
www.analog.com
Development Systems Getting Started Tutorial
PLEASE SEE THE LAST PAGE FOR AN IMPORTANT
WARNING AND LEGAL TERMS AND CONDITIONS.
Rev. 0 | Page 1 of 6
FEATURES
evaluation board
2 power supply options: 5 V from a USB port connected to
the Segger J-Link OB emulator or 1.8 V to 3.6 V from an
external power supply
On-board resistance temperature detector (RTD) for
temperature measurements
Access to all analog and digital pins
Power and general-purpose LEDs
Reset and download push-buttons
8-pin connector to the Segger J-Link OB emulator
32.768 kHz external crystal
EVALUATION KIT CONTENTS
An evaluation board (
) that facilitates performance evaluation
of the device with minimal external components
An Analog Devices, Inc., Segger J-Link OB emulator (USB-
SWD/UART-EMUZ)
1 USB cable
1 installation DVD
ONLINE RESOURCES
data sheet
ADuCM362/ADuCM363 Hardware Reference Manual
GENERAL DESCRIPTION
development system allows
evaluation of
silicon. This quick
start guide introduces the support features and tools supplied
with the
evaluation kit. In addition,
this guide describes how to connect the evaluation hardware.
The getting started guide works as a tutorial, providing instructions
on how to download third party evaluation software tools.
Instructions are also provided on how to load code examples
supplied with the software tools.
is a fully integrated, 4 kSPS, 24-bit data
acquisition system that incorporates dual, high performance
multichannel sigma-delta (Σ-Δ) analog-to-digital converters
(ADCs), a 32-bit ARM® Cortex®-M3 processor, and Flash/EE
memory on a single chip.
is designed for direct interfacing to external
precision sensors in both wired and battery-powered applications.
The
contains all the features of the
except for the ADC0, which is removed.
This guide gives users the ability to generate and download user
code for use in unique end system requirements.
Complete specifications for the
data sheet and should
be consulted in conjunction with this user guide when using the
evaluation board.
EVALUATION BOARD
15
16
9
-00
1
Figure 1.
