1 Preface
Thank you for purchasing the Analog Devices, Inc.
ADSP-CM419F EZ-KIT
®
evaluation system.
The ADSP-CM419F processor is based on the ARM
®
Cortex
®
-M4 prprocessor core with floatingpoint unit operat-
ing at frequencies up to 240 MHz, and the ARM® Cortex-M0TM processor core operating at frequencies up to
100 MHz. The processors integrate up to 160K Bytes of SRAM memory with ECC, up to 1M Byte of flash memo-
ry with ECC, accelerators and peripherals optimized for motor control and photo-voltaic (PV) inverter control, and
an analog front end consisting of up to two 6 times simultaneous sampling 16-bit SAR-type ADCs, one 14-bit SAR
monitor ADC and one 12-bit DAC. The EZ-KIT ships with all of the necessary hardware to get you up and run-
ning and start the evaluation immediately.
The EZ-KIT contains an analog interface and PWM/digital interface. These interfaces are provided for connecting
with daughter boards to expand on the functionality of the EZ-KIT.
The evaluation board is designed to be used in conjunction with the IAR Embedded Workbench
®
and Segger
®
development environment for advanced application code development and debug such as:
•
Create, compile, assemble, and link application programs written in C++, C, and assembly
•
Load, run, step, halt, and set breakpoints in application programs
•
Read and write data and program memory
•
Read and write core and peripheral registers
Purpose of This Manual
This manual provides instructions for installing the product hardware (board). The text describes operation and
configuration of the board components and provides guidelines for running code on the board.
Intended Audience
The primary audience for this manual is a programmer who is familiar with an ARM Cortex-M4 core. The ADSP-
CM41x family of mixed-signal control processors is based on the ARM Cortex-M4 core.
Preface
ADSP-CM419F EZ-KIT
®
Manual
1–1
