EZ-KIT Mini Session Startup
1-6
ADSP-BF706 EZ-KIT Mini Evaluation System Manual
8. In the
Name
edit box, users can select an appropriate name to
describe the configuration, otherwise a default name is provided.
9. In the
Program(s) to load
section, choose the program to load (if
the appropriate program is not already populated) when connect-
ing to the board. If not loading any program upon connection to
the target, do not make any changes.
While connected to the target, there is no way to choose a program
to download. To load a program once connected, terminate the
session and then load the new program.
To delete a configuration, go to the
Debug Configurations
dialog
box and select the configuration to delete. Click
and choose
Yes
when asked if you wish to delete the selected launch configuration.
Then
Close
the dialog box.
To disconnect from the target board, click the terminate button
or choose
Run > Terminate
.
To delete a session, choose
Target
>
Session > Session List
. Select
the session name from the list and click
Delete
. Click
OK
.
The default configurations that show up in the CCES Debug Con-
figurations wizard are for JTAG mode debugging only. To use
SWD mode, a new platform needs to be created using the Target
Configurator. When creating a new platform, choose
BF706
EZ-KIT-Mini
and then select JTAG or SWD.
