Analog Devices ADSP-2189M EZ-KIT Lite, Руководство пользователя

Страница: 36 / 81

Using EZ-KIT Lite Vi+ Interface
2-12 ADSP-2189M EZ-KIT Lite Evaluation System Manual
By following these steps, your DSP application programs build consis-
tently and accurately with minimal project management. Note the
following restrictions of this system:
#
The size of the DSP executable that you can build using the
EZ-KIT Lite tools is limited to 8K.
#
Do not run more than one ADSP-2189M EZ-KIT Lite session in
the debugger at any one time. You may run an EZ-KIT Lite session
and a simulator or ICE session at the same time or you can open
two debugger interfaces to run more than one EZ-KIT Lite session.
Starting Visual DSP++
After the Vi+ software and license have been installed, click the
Windows
Start menu.
1. Select the Start button on the Windows taskbar, then choose Pro-
grams , Analog Devices , Vi+ 3.5 for 16-bit Processors ,
Vi+ Environment .
If you are running Vi+ for the first time, go to step 4. If
you already have existing sessions, the
Session List dialog box
appears on the screen.
2. Click New Session .
3. The New Session dialog box, shown in Figure 2-1 , appears on the
screen.
4. In Debug Target , choose EZ-KIT Lite (ADSP-218x) .
5. In Processor , choose the appropriate processor, ADSP-2189
6. Type a new target name in Session Name or accept the default
name.