Specifications
2-16
ADSP-21160 EZ-KIT Lite Evaluation System Manual
Specifications
The following board specifications are covered in this section.
•
•
“Board Current Measurements” on page 2-16
Power Supply
The power connector supplies DC power to the EZ-KIT Lite board.
shows the power supply specifications.
Board Current Measurements
The ADSP-21160M EZ-KIT Lite board provides two zero-ohm resistors
that can be removed to measure current draw.
number and the voltage plane measurable at that location.
Table 2-6. Power Supply Specifications
Terminal
Connection
Center pin
+7.0V@2 amps
Outer ring
GND
Table 2-7. Current Measurements
Resistor
Voltage Plane
Description
R7
VDD_EXT
Core voltage of the processor
R6
VDD_INT
IO voltage of the processor
www.BDTIC.com/ADI